0 CART
items in your cartto quote
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
0
Tripp Lite

Tripp Lite PDU Switched ATS 120V 20A 5-15/20R 16 Outlet L5-20P Horizontal TAA - 16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable

Category PDUs
1814152
Tripp Lite

Tripp Lite PDU Switched ATS 120V 20A 5-15/20R 16 Outlet L5-20P Horizontal TAA - 16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable

Item Code: 1814152
Category PDUs
Manufacturer Tripp Lite by Eaton
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.
UNSPSC Code

39121017

Weight

19.9lb

Height

5.6in

Width

23.5in

Length

21in

Brand

Tripp Lite

Brand Name

Tripp Lite

Category

PDUs

Country of Origin

Taiwan

Depth

14.5"

Environmental Certification

RoHS

Environmentally Friendly

Yes

Height

1.8"

Input Voltage

120 V AC

Limited Warranty

2 Year

Manufacturer

Tripp Lite by Eaton

Manufacturer Part Number

PDUMH20ATNET

Manufacturer Website Address

http://www.tripplite.com

Mount Type

Rack-mountable

Output Voltage

120 V AC

PDU Type

Switched

Plug/Connector Detail

2 x NEMA L5-20P

Plug/Connector Type

NEMA L5-20P

Power Rating (VA)

2400 VA

Product Color

Black

Product Model

PDUMH20ATNET

Product Name

PDUMH20ATNET PDU Switched ATS 120V 20A 16 Outlet

Product Type

PDU

Rack Height

1U

Receptacle Detail

16 x NEMA 5-15/20R

Receptacle Type

NEMA 5-15/20R

TAA Compliant

Yes

Weight (approximate)

12.20 lb

Width

1.8"

Call for price
Add to favorites list
Compare
Tripp Lite

Tripp Lite PDU Switched ATS 120V 20A 5-15/20R 16 Outlet L5-20P Horizontal TAA - 16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable

Category PDUs
1814152
Tripp Lite

Tripp Lite PDU Switched ATS 120V 20A 5-15/20R 16 Outlet L5-20P Horizontal TAA - 16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable

Item Code: 1814152
Category PDUs
Manufacturer Tripp Lite by Eaton
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.
UNSPSC Code

39121017

Weight

19.9lb

Height

5.6in

Width

23.5in

Length

21in

Brand

Tripp Lite

Brand Name

Tripp Lite

Category

PDUs

Country of Origin

Taiwan

Depth

14.5"

Environmental Certification

RoHS

Environmentally Friendly

Yes

Height

1.8"

Input Voltage

120 V AC

Limited Warranty

2 Year

Manufacturer

Tripp Lite by Eaton

Manufacturer Part Number

PDUMH20ATNET

Manufacturer Website Address

http://www.tripplite.com

Mount Type

Rack-mountable

Output Voltage

120 V AC

PDU Type

Switched

Plug/Connector Detail

2 x NEMA L5-20P

Plug/Connector Type

NEMA L5-20P

Power Rating (VA)

2400 VA

Product Color

Black

Product Model

PDUMH20ATNET

Product Name

PDUMH20ATNET PDU Switched ATS 120V 20A 16 Outlet

Product Type

PDU

Rack Height

1U

Receptacle Detail

16 x NEMA 5-15/20R

Receptacle Type

NEMA 5-15/20R

TAA Compliant

Yes

Weight (approximate)

12.20 lb

Width

1.8"

Call for price
Add to favorites list
Compare
SEARCH ×